KM-1018-3

Home > Ceramic Kilns > KM-1018-3

km1018

A Ceramic Kiln That Just Fits

Fits most small studios. Easy to load for those who are vertically challenged. Has all the bells and whistles of the larger kilns in a more compact size.  This model is constructed with energy saving 3″ brick.

KilnMaster Controller

Sophisticated, Yet Easy to Use

  • Write your own firing programs with up to 32 Segments using Ramp and Hold. Now you can store up to 12 programs.
  • … or use the tried and true factory set programs in ConeFire Mode
  • Built in Diagnostics give you or our technicians the ability to diagnose kiln problems with just a few button presses.
  • New Safety Features help prevent accidental starts and overfires.
  • New software keeps track of your Firing Costs and the Number of Firings
  • Fuse Glass, Slow cool Cone 6 Glazes, Grow Crystals…whatever you want to program this controller can handle.
  • …and so much more. Click Here to see the whole story.

Print

Current Sensing Technology

Skutt is one of the few brands that installs a Current Sensor in every KilnMaster Kiln. This allows you to read the Amperage of each section of the kiln as well as the Voltage and Voltage Under Load.

Now with the touch of a few buttons you can give those readings over the phone to your kiln repair technician so they can troubleshoot the problem and make sure they have the correct parts when they come out for the repair. This Saves Time and Money.

Prior to the use of these current sensors someone would have to come to your house and test the amperage and voltage inside the control box with live wires exposed. This system is Much Safer.


Sectional Design

Sectional Design

Sectional Design is a good idea on so many levels.

Moving

Imagine trying to move a kiln into the basement or through a narrow door without being able to break it down into sections.

Repair
No more standing on your head in the kiln to replace those bottom elements or removing every brick in the kiln to get to the one you want to replace. Just remove the control box, unhook the buckles and place the section you want to work on on a table.

Replacement
We hope nothing really bad happens to your kiln … but … if it does, isn’t nice to know you can replace one bad section instead of the whole kiln?


Kiln Elements split

Balanced Elements

A large amount of the heat you lose in your kiln passes to through the lid and slab of your kiln. To compensate for this, Skutt directs more heat to these areas when they design the elements. The fact that we have twice the element grooves in our kilns gives us more design flexibility than some of our competitors.

It also gives you more loading options since it is always recommended to have at least one element radiating between each layer of shelves. Oh and by the way, twice the grooves means you get twice the amount of element wire, which means each element doesn’t have to work as hard, which means longer element life! Whew!


The Thermocouple

  • Exposed Thermocouple equals faster reaction time and higher accuracy.
  • Inexpensive, plus we give you an extra one when you buy your kiln.
  • Easy and quick to replace.
  • Type S (Platinum) Upgrades Available.

The Warranty

  • Unlike most warranties, ours covers Parts AND Labor.
  • Never Pro-Rated.
  • Serviced by the most extensive, knowledgeable and talented distributor network in the industry.
  • Backed by a company whose mission statement is “We help you make great things”. When your kiln is down, you can’t make great things.

The Lid Lifter

  • Standard on all 10 and 12 sided ceramic kilns
  • Lift 100lbs with ease!
  • All stainless construction.
  • Easy and safe to tension.

And So Much More!

When you are buying a kiln, you are not just buying the equipment, you are also buying the service that comes before and after the sale. From the moment we cut that first brick to the day you open the box, to the day you are ready to retire it, our reputation is on the line and we take that very seriously. Get the whole story here.

Resource Links

Below you will find links to resources that are specific to this model:
KilnMaster Kiln Manual

KilnMaster Operation Video


 


ModelPhaseVoltsAmpsWattsTemp (F)Cubic FtOpening (in)Depth (in)NEMA ReceptacleShip Dims. (in)*Ship Wt. (lbs)
Download a KM-1018-3 3 Inch Brick 1 Phase 240 Volts Product Spec Sheet
Download a KM-1018-3 3 Inch Brick 1 Phase 208 Volts Product Spec Sheet
KM-1018-3 124039.49460Cone 10, 2350 F 4.2 22.00 x 22.00 18 6-50 37 x 40 x 35 275
KM-1018-3 1208408320Cone 10, 2350 F 4.2 22.00 x 22.00 18 6-50 37 x 40 x 35 275
*Weights listed are only approximations. Actual weight will vary due to humidity levels and varying brick density.
The picture above displays a
KM-1027 kiln

Chamber Capacity

DepthOpening WidthOpening LengthCu. ft.Tea Bowls
18 in 22 in 22 in 4.2 26

Approximately 22 in. x 22 in. opening and 18 in. high: 4.2 cubic feet, 26 bowls.

Bowl, 6 inches in diameter and 3 inches high.

KilnLink Service - 1 Year
KilnLink-Service-1-Year


Learn More
KilnLink Service - 5 Year
KilnLink-Service-5-Year


Learn More
Lid Lifter Upgrade Kit
Lid-Lifter-Upgrade-Kit


Learn More
EnviroVent 2
EnviroVent-2


Learn More

Furniture Kit
Furniture-Kit


Learn More
Easy View
Easy-View


Learn More
EnviroVent 2 - 8ft. Extension Kit
EnviroVent-2-8ft.-Extension-Kit


Learn More
EnviroLink
EnviroLink


Learn More

Rolling Stand
Rolling-Stand


Learn More
KilnLink Box Package
KilnLink-Box-Package


Learn More
EV2 Rolling Stand Adapter
EV2-Rolling-Stand-Adapter


Learn More
APM Elements
APM-Elements


Learn More
KilnLink
KilnLink


Learn More

Contents List

Skutt Kilns should arrive fully assembled.

Packed with the kiln you will find the following items:

  • Kiln Stand
  • Instructional Video
  • Stand Feet
  • Extra Thermocouple (unless Type S)
  • Peep Plugs – attached to the kiln stand, enough to fill each peephole on your particular model.

Buying Skutt Products

All Skutt products, with the exception of parts, need to be purchased through an Authorized Skutt Distributor. To locate a Distributor just click on the Distributor Finder icon below.

If you are looking to purchase a kiln, you may want to use the Build A Kiln tool first so you are absolutely sure you are ordering the correct kiln with all of the accessories and upgrades you want.

If you want to buy parts, you are welcome to purchase them directly from Skutt however your local distributor may have them in stock which would save you money on shipping. Use the Parts Finder Tool to pull up all the parts available for your specific kiln. If you want to order directly from Skutt call (503) 774-6000

If you are an Architect or contractor who is looking to Specify a particular model for future purchase, use the Build A Spec tool to generate a Specification Sheet.