KM-1022Home > Ceramic Kilns > KM-1022
It Just Fits
Fits most small studios. Easy to load for those who are vertically challenged. Has all the bells and whistles of the larger kilns in a more compact size
Sophisticated, Yet Easy to Use
- Write your own firing programs with up to 32 Segments using Ramp and Hold. Now you can store up to 12 programs.
- … or use the tried and true factory set programs in ConeFire Mode
- Built in Diagnostics give you or our technicians the ability to diagnose kiln problems with just a few button presses.
- New Safety Features help prevent accidental starts and overfires.
- New software keeps track of your Firing Costs and the Number of Firings
- Fuse Glass, Slow cool Cone 6 Glazes, Grow Crystals…whatever you want to program this controller can handle.
- …and so much more. Click Here to see the whole story.
Current Sensing Technology
Skutt is one of the few brands that installs a Current Sensor in every KilnMaster Kiln. This allows you to read the Amperage of each section of the kiln as well as the Voltage and Voltage Under Load.
Now with the touch of a few buttons you can give those readings over the phone to your kiln repair technician so they can troubleshoot the problem and make sure they have the correct parts when they come out for the repair. This Saves Time and Money.
Prior to the use of these current sensors someone would have to come to your house and test the amperage and voltage inside the control box with live wires exposed. This system is Much Safer.
Sectional Design is a good idea on so many levels.
Imagine trying to move a kiln into the basement or through a narrow door without being able to break it down into sections.
No more standing on your head in the kiln to replace those bottom elements or removing every brick in the kiln to get to the one you want to replace. Just remove the control box, unhook the buckles and place the section you want to work on on a table.
We hope nothing really bad happens to your kiln … but … if it does, isn’t nice to know you can replace one bad section instead of the whole kiln?
A large amount of the heat you lose in your kiln passes to through the lid and slab of your kiln. To compensate for this, Skutt directs more heat to these areas when they design the elements. The fact that we have twice the element grooves in our kilns gives us more design flexibility than some of our competitors.
It also gives you more loading options since it is always recommended to have at least one element radiating between each layer of shelves. Oh and by the way, twice the grooves means you get twice the amount of element wire, which means each element doesn’t have to work as hard, which means longer element life! Whew!
- Exposed Thermocouple equals faster reaction time and higher accuracy.
- Inexpensive, plus we give you an extra one when you buy your kiln.
- Easy and quick to replace.
- Type S (Platinum) Upgrades Available.
- Unlike most warranties, ours covers Parts AND Labor.
- Never Pro-Rated.
- Serviced by the most extensive, knowledgeable and talented distributor network in the industry.
- Backed by a company whose mission statement is “We help you make great things”. When your kiln is down, you can’t make great things.
The Lid Lifter
- Standard on all 10 and 12 sided ceramic kilns
- Lift 100lbs with ease!
- All stainless construction.
- Easy and safe to tension.
And So Much More!
When you are buying a kiln, you are not just buying the equipment, you are also buying the service that comes before and after the sale. From the moment we cut that first brick to the day you open the box, to the day you are ready to retire it, our reputation is on the line and we take that very seriously. Get the whole story here.
|Model||Phase||Volts||Amps||Watts||Temp (F)||Cubic Ft||Opening (in)||Depth (in)||Wire Awg||NEMA Receptacle||Ship Dims. (in)||*Ship Wt. (lbs)|
|Download a KM-1022 1 Phase 240 Volts Product Spec Sheet|
|Download a KM-1022 1 Phase 208 Volts Product Spec Sheet|
|Download a KM-1022 3 Phase 240 Volts Product Spec Sheet|
|Download a KM-1022 3 Phase 208 Volts Product Spec Sheet|
|Download a KM-1022 3 Inch Brick 1 Phase 240 Volts Product Spec Sheet|
|Download a KM-1022 3 Inch Brick 1 Phase 208 Volts Product Spec Sheet|
|Download a KM-1022 3 Inch Brick 3 Phase 240 Volts Product Spec Sheet|
|Download a KM-1022 3 Inch Brick 3 Phase 208 Volts Product Spec Sheet|
|KM-1022||1||240||48||11520||Cone 10, 2350 F||5.7||23.00 x 23.00||22||6||6-50||37 x 40 x 41||240|
|KM-1022||1||208||48||9984||Cone 10, 2350 F||5.7||23.00 x 23.00||22||6||6-50||37 x 40 x 41||240|
|KM-1022||3||240||34.6||11520||Cone 10, 2350 F||5.7||23.00 x 23.00||22||8||15-50||37 x 40 x 41||240|
|KM-1022||3||208||34.6||9984||Cone 10, 2350 F||5.7||23.00 x 23.00||22||8||15-50||37 x 40 x 41||240|
|KM-1022-3||1||240||48||11520||Cone 10, 2350 F||5.25||22.00 x 22.00||22||6||6-50||37 x 40 x 41||298|
|KM-1022-3||1||208||48||9984||Cone 10, 2350 F||5.25||22.00 x 22.00||22||6||6-50||37 x 40 x 41||298|
|KM-1022-3||3||240||34.6||11520||Cone 10, 2350 F||5.25||22.00 x 22.00||22||8||15-50||37 x 40 x 41||298|
|KM-1022-3||3||208||34.6||9984||Cone 10, 2350 F||5.25||22.00 x 22.00||22||8||15-50||37 x 40 x 41||298|
|Depth||Opening Width||Opening Length||Cu. ft.||Tea Bowls|
|22 in||23 in||23 in||5.7||32|
Approximately 23 in. x 23 in. opening and 22 in. high: 5.7 cubic feet, 32 bowls.
Bowl, 6 inches in diameter and 3 inches high.
KilnLink Service - 1 Year
KilnLink Service - 5 Year
EV2 Rolling Stand Adapter
EnviroVent 2 - 8ft. Extension Kit
KilnLink Box Package
Skutt Kilns should arrive fully assembled.
Packed with the kiln you will find the following items:
- Kiln Stand
- Instructional Video
- Stand Feet
- Extra Thermocouple (unless Type S)
- Peep Plugs – attached to the kiln stand, enough to fill each peephole on your particular model.
Buying Skutt Products
All Skutt products, with the exception of parts, need to be purchased through an Authorized Skutt Distributor. To locate a Distributor just click on the Distributor Finder icon below.
If you are looking to purchase a kiln, you may want to use the Build A Kiln tool first so you are absolutely sure you are ordering the correct kiln with all of the accessories and upgrades you want.
If you want to buy parts, you are welcome to purchase them directly from Skutt however your local distributor may have them in stock which would save you money on shipping. Use the Parts Finder Tool to pull up all the parts available for your specific kiln. If you want to order directly from Skutt call (503) 774-6000
If you are an Architect or contractor who is looking to Specify a particular model for future purchase, use the Build A Spec tool to generate a Specification Sheet.