GP-706
Home > Glass Fusing Kilns > GP-706The Original
This is quite possibly the first commercially available Glass Fusing kiln available on the market. Inspired by genius Bullseye Glass co-founder, Boyce Lundstrum, the GP706 became a staple among the early pioneers of glass fusing.
Analog Pyrometer
The GP706 comes with an analogl pyrometer that reads the temperature of the kiln chamber in degrees Fahrenheit. Since it is an analog pyrometer (as opposed to digital)it does not require batteries and can be mounted right to the kiln. The Pyrometer comes fully installed on the kiln.
The temperature rate (speed at which the kiln heats up) is controlled by the infinite switch on the kiln. It will take a while to learn the switch settings that create the rate increases you need. It absolutely imperative that you monitor the kiln at all times. When the kiln reaches the temperature you are aiming for you can turn the switch off or you can control the rate of cooling also by using the switch. if all this is too much for you, you may want to upgrade to the HotStart Pro which has a programmable controller.
Plugs Into Household Voltage
Nothing against electricians, but who really enjoys paying to have their house rewired. With the FireBox 14 you take it out of the box, plug it into any spare 120V outlet you have in the house and you are ready to start fusing. Okay, it does need to be a grounded outlet.
Full Coverage Element Design
The element routing pattern in the lid perfectly matches the opening in the chamber with grooves spaces evenly across the lid. What does this mean? It means extremely even heating across your glass, that’s what..
Great for Platters
This kiln will hold up to a 12 inch platter. Can you say dinner ware set? It’s 6 inch depth even allows you to use up to 4″ deep slump molds.
The Warranty
- Unlike most warranties, ours covers Parts AND Labor.
- Never Pro-Rated.
- Serviced by the most extensive, knowledgeable and talented distributor network in the industry.
- Backed by a company whose mission statement is “We help you make great things”. When your kiln is down, you can’t make great things.
And So Much More!
When you are buying a kiln, you are not just buying the equipment, you are also buying the service that comes before and after the sale. From the moment we cut that first brick to the day you open the box, to the day you are ready to retire it, our reputation is on the line and we take that very seriously. Get the whole story here.
Resource Links
Below you will find links to resources that are specific to this model:
GP706 Kiln Manual
Model | Phase | Volts | Amps | Watts | Temp (F) | Cubic Ft | Opening (in) | Depth (in) | Wire Awg | NEMA Receptacle | Ship Dims. (in) | *Ship Wt. (lbs) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
||||||||||||
GP-706 | 1 | 115 | 15 | 1725 | Cone , 1650 F | 0.6 | 15.00 x 15.00 | 6.5 | 12 | 5-15 | 29 x 28 x 18 | 67 |

Chamber Capacity
Depth | Opening Width | Opening Length | Cu. ft. |
---|---|---|---|
6.5 in | 15 in | 15 in | 0.6 |
Approximately 15 in. x 15 in. opening and 6.5 in. high: 0.6 cubic feet.
Contents List
Skutt Kilns should arrive fully assembled.
Packed with the kiln you will find the following items:
- Kiln Stand
- Operating Manual
- Stand Feet
- Pyrometer
- Peep Plug
Buying Skutt Products
All Skutt products, with the exception of parts, need to be purchased through an Authorized Skutt Distributor. To locate a Distributor just click on the Distributor Finder icon below.
If you are looking to purchase a kiln, you may want to use the Build A Kiln tool first so you are absolutely sure you are ordering the correct kiln with all of the accessories and upgrades you want.
If you are an Architect or contractor who is looking to Specify a particular model for future purchase, use the Build A Spec tool to generate a Specification Sheet.